Balancing/Bearing Fault Simulator
Featured Products
-
BBS Package 2: Kits for Bearing Defect Studies
$9,275.00
-
2) SAT Three Train
$3,795.00
-
4) SAT Package 1: Complete Two Train Alignment Training System
$4,795.00
-
4 Eddy Current Proximity Probe
$4,000.00
-
2 Eddy Current Proximity Probe
$2,200.00
Showing all 15 results
Balancing/Bearing Fault Simulator
Includes: – 1/3 HP Variable frequency AC drive with multi-featured front panel programmable controller, 110 or 220 VAC 1 phase supply 3 Phase 1/3 HP motor, pre-wired self-aligning mounting system…
BBS Package 1: Kits for Balancing Studies
Includes: -Basic BBS -Balancing training book -Eccentric rotor -Cocked rotor -Centrally bent shaft for balance studies
BBS Package 2: Kits for Bearing Defect Studies
Includes: -Basic BBS -5/8″ shaft bearing fault kit -5/8″ shaft bearing loader -1″ shaft study kit -1″ shaft bearing fault kit -1″ shaft bearing loader -Cocked Bearing housing -5/8″ shaft…
BBS Package 3: Kits for Balancing and Bearing Studies
Includes: -Basic BBS -Balancing training book -Eccentric rotor -Cocked rotor -Centrally bent shaft for balance studies -5/8″ shaft bearing fault kit -5/8″ shaft bearing loader -1″ shaft study kit -1″…
1″ shaft bearing fault kit
The kit consists of one inner race defect, one outer race defect, one with ball defect, and one combination of defects.
1″ shaft bearing loader
The kit consists of one 1″ bore loader weighting 11lb (5kg) and two collars.
1″ shaft bearing study kit
The kit consists of two split bearing housings, two 1″ inside diameter bearings, one 1″ diameter shaft, and one coupling.
5/8″ shaft bearing fault kit
The kit consists of one inner race defect, one outer race defect, one with ball defect, and one combination of defects.
5/8″ shaft bearing loader
The kit consists of one 5/8″ bore loader weighting 11lb (5kg) and two collars.
5/8″ shaft sleeve bearing kit
The kit consists of two customized grease-lubricated, babbitt lined sleeve bearings, two bearing pedestals, and various thickness plastic shims.
Balancing Training Book
The Balancing Training Book teaches the basics of machine balancing.
Centrally bent rotor shaft for balance studies
The kit consists of one 3/4″ shaft centrally bent ~0.020″
Cocked Bearing Housing
The kit consists of one cocked bearing housing
Cocked Rotor
The kit consists of a cocked aluminum rotor (0.5 degree off-axis) and one clamp collar
Eccentric Rotor
The kit consists of one aluminum rotor with an asymmetrically located center and one clamp collar.