TachometersA tachometer is indispensable in vibration analysis to compare actual shaft or rotor speed to vibration spectrum frequencies, locating resonance and sidebands of machinery.
|
Pocket Laser Digital Tachometer kit (MO-6125-011) |
- Display:: 5 Digits, 5 Alpha-numeric LCD
- Range(s): Optical: 5 to 200,000 RPM
- Accuracy: Optical:±0.01% of reading
- Totalizer: 1-999,990
- Resolution: 0.001 to 10 RPM (range dependent)
- Operating Range: 2 inches to 25 feet*, ±70°
- Power:(2) “AA” 1.5 VDC batteries (30 hours)
- The kit consists of one tachometer, one remote contact assembly, 5 ft roll of T-5 reflective tape and carrying case
| |
Pistol Grip Tachometer (MO-6130-03x) |
- Rang: 5-100,000 RPM
- Accuracy: ±1 RPM or 0.01% of reading
- Resolution: 1 RPM
- Operating Range: 10 feet for Laser Model and 36″ for LCD Model
- Display :6 digit, 0.5″ high Liquid Crystal Display
- Power On Switch: Pistol grip trigger with latching push button
- Power: NiCad batteries and AC Recharger
- The kit consists of one tachometer, 12 inches of reflective tape, one recharger, and carrying case. Specify 115V or 230V
| |
Remote Optical Sensor (MO-6180-057) |
- Threaded stainless steel remote optical sensors with a visible red LED light source
- The kit consists of one remote optical sensor with 8 foot cable and mounting bracket.
- Requires MO-6125-011 or MO-6130-03x
- Operating Range: 10 feet for Laser Model and 36″ for LCD Model
- Display :6 digit, 0.5″ high Liquid Crystal Display
- Power On Switch: Pistol grip trigger with latching push button
- Power: NiCad batteries and AC Recharger
- The kit consists of one tachometer, 12 inches of reflective tape, one recharger, and carrying case. Specify 115V or 230V
| |
Strobe Output to DAQ (MO-6280-037) |
- Record strobe measurement with a data acquisition system
- The kit consists of one 6 foot input/output cable, 1/8″ mono phone plug to BNC connector
- Requires MO-6125-011 or MO-6130-03x
- Operating Range: 10 feet for Laser Model and 36″ for LCD Model
- Display :6 digit, 0.5″ high Liquid Crystal Display
- Power On Switch: Pistol grip trigger with latching push button
- Power: NiCad batteries and AC Recharger
- The kit consists of one tachometer, 12 inches of reflective tape, one recharger, and carrying case. Specify 115V or 230V
| |