Model 622B01 Product Type: Accelerometer, Vibration Sensor General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 15k Hz, top exit, MIL type conn. View Spec Sheet (PDF) View photo and drawing .
PERFORMANCE ENGLISH SI Sensitivity(± 5 %) 100 mV/g 10.2 mV/(m/s²) [2] Measurement Range ± 50 g ± 490 m/s² Frequency Range(± 5 %) 35 to 360,000 cpm 0.58 to 6000 Hz [3] Frequency Range(± 10 %) 25 to 600,000 cpm 0.42 to 10,000 Hz Frequency Range(± 3 dB) 12 to 900,000 cpm 0.2 to 15,000 Hz Resonant Frequency 1800 kcpm 30 kHz [1] Broadband Resolution(1 to 10,000 Hz) 50 µg 490 µm/sec2 [1] Non-Linearity ± 1 % ± 1 % [4] Transverse Sensitivity ≤ 5 % ≤ 5 % ENVIRONMENTAL Overload Limit(Shock) 5000 g pk 49,050 m/s² pk Temperature Range -65 to +250 °F -54 to +121 °C Temperature Response See Graph See Graph [1] Enclosure Rating IP68 IP68 ELECTRICAL Settling Time(within 1% of bias) ≤ 5.0 sec ≤ 5.0 sec Discharge Time Constant ≥ 0.8 sec ≥ 0.8 sec Excitation Voltage 18 to 28 VDC 18 to 28 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance <100 ohm <100 ohm Output Bias Voltage 8 to 12 VDC 8 to 12 VDC Spectral Noise(10 Hz) 4.0 µg/√Hz 39.2 (µm/sec2)/√Hz [1] Spectral Noise(100 Hz) 0.8 µg/√Hz 7.85 (µm/sec2)/√Hz [1] Spectral Noise(1 kHz) 0.4 µg/√Hz 3.92 (µm/sec2)/√Hz [1] Electrical Protection RFI/ESD RFI/ESD Electrical Isolation >108 ohm >108 ohm PHYSICAL Size (Hex x Height) 7/8 in x 2.06 in 22 mm x 52.3 mm Weight 3.3 oz 94 gm Mounting Thread 1/4-28 Female No Metric Equivalent [5] Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 N-m Sensing Element Ceramic Ceramic Sensing Geometry Shear Shear Housing Material Stainless Steel Stainless Steel Sealing Welded Hermetic Welded Hermetic Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015 Electrical Connection Position Top Top SUPPLIED ACCESSORIES: Model 081A40 Mounting Stud (1) Model ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency (1) OPTIONAL VERSIONS M- Metric Mount Supplied Accessory : Model M081A61 Mounting Stud 1/4-28 to M6 X 1 (1) All specifications are at room temperature unless otherwise specified. NOTES: [1] Typical. [2] Conversion Factor 1g = 9.81 m/s². [3] The high frequency tolerance is accurate within ±10% of the specified frequency. [4] Zero-based, least-squares, straight line method. [5] 1/4-28 has no equivalent in S.I. units. [6] See PCB Declaration of Conformance PS023 for details. [6]
Download Drawing 35886-NR.pdf
Top