Model 086C41 Product Type: Impact Hammer, Impulse Hammer Short-sledge Modally Tuned® ICP® impact hammer , 1 mV/lbf (0.23 mV/N), for industrial machinery testing View Spec Sheet (PDF) View photo and drawing .
PERFORMANCE ENGLISH SI Sensitivity(± 15 %) 1 mV/lbf 0.23 mV/N Measurement Range ± 5000 lbf pk ± 22,000 N pk Frequency Range(-10 dB)(Hard Tip) 1 kHz 1 kHz [1][2] Frequency Range(-10 dB)(Medium Tip) 700 Hz 700 Hz [1][2] Frequency Range(-10 dB)(Soft Tip) 450 Hz 450 Hz [1][2] Frequency Range(-10 dB)(Super Soft Tip) 400 Hz 400 Hz [1][2] Resonant Frequency ≥ 12 kHz ≥ 12 kHz Non-Linearity ≤ 1 % ≤ 1 % ELECTRICAL Excitation Voltage 18 to 30 VDC 18 to 30 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance <100 ohm <100 ohm [1] Output Bias Voltage 8 to 12 VDC 8 to 12 VDC Discharge Time Constant ≥ 1400 sec ≥ 1400 sec [1] PHYSICAL Sensing Element Quartz Quartz Sealing Hermetic Hermetic Hammer Mass 2.4 lb 1.1 kg Head Diameter 2.0 in 5.1 cm Tip Diameter 2.0 in 5.1 cm Hammer Length 14.5 in 37 cm Electrical Connection Position Bottom of Handle Bottom of Handle Electrical Connector BNC Jack BNC Jack SUPPLIED ACCESSORIES: Model 084A60 Tip - super soft plastic, gray (1) Model 084A61 Tip - soft plastic, brown (1) Model 084A62 Tip - medium plastic, red (1) Model 084A63 Tip - hard plastic, black (1) Model HCS-2 Calibration of Series 086 instrumented impact hammers (1) All specifications are at room temperature unless otherwise specified. NOTES: [1] Typical. [2] Varies depending on test structure. These values are from hitting a stiff steel mass. Hammer did not have extender mass attached.
Download Drawing 2610-A.pdf
Top